Microsoft

MS-721 Free Practice Questions — Page 10

Question 93

You have a Teams Phone deployment that has users in Canada and the United States. You have a Session Border Controller (SBC) in Calgary and an SBC in New York City. Both SBCs are connected to Direct Routing. You plan to implement toll bypass for the users in Canada. The solution must meet the following requirements: • Prioritize the New York City SBC for calls to numbers in the United States. • Leverage the Calgary SBC for resiliency if the New York City SBC is unavailable. You create a PSTN usage named Canada and associate this policy to a voice routing policy. Which two voice routes should you create with the Canada PSTN usage? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create a wildcard voice route that has a priority of 2 and references the gateway in Calgary.
B. For only United States numbers, create a voice route that has a priority of 2 and references the gateway in Calgary.
C. Create a wildcard voice route that has a priority of 1 and references the gateway in New York City.
D. For only United States numbers, create a voice route that has a priority of 1 and references the gateway in New York City.
Show Answer
Correct Answer: B, D
Explanation:
Use two routes that match only United States numbers. The priority 1 route sends US calls to the New York City SBC as the preferred gateway. An identical US-number route with priority 2 sends calls to the Calgary SBC only if the preferred SBC is unavailable, providing resiliency. A wildcard route to Calgary would also capture non-US destinations and does not specifically implement the required US toll-bypass preference. Sources: https://learn.microsoft.com/en-us/microsoftteams/direct-routing-plan https://learn.microsoft.com/en-us/microsoftteams/direct-routing-connect-the-sbc

Question 94

Case Study - This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided. To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study. At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section. To start the case study - To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question. Overview. Company Information - Contoso, Ltd. is an international manufacturing company that has 2,000 employees. Contoso currently uses a third-party meeting service. The company plans to migrate the meeting service to Microsoft Teams and replace all legacy video teleconferencing (VTC) devices. Overview. Physical Locations - Contoso has offices in Toronto, New York, Rome, and London. The company has a global sales team that works remotely. Existing Environment. Active Directory Environment The on-premises network contains an Active Directory Domain Services (AD DS) forest named contoso.com. Existing Environment. Microsoft 365 and Teams Environment Contoso has a Microsoft 365 subscription. All users are licensed for Microsoft 365 E5 and Teams Premium. All users are enabled for Teams Phone by using Operator Connect. The contoso.com domain syncs to Microsoft 365 by using Azure AD Connect cloud sync. All users use the Microsoft Authenticator app for multi-factor authentication (MFA) to cloud services. A Microsoft Surface Hub device is deployed to the boardroom in each office. The reception area at the Toronto office is configured to use a phone number of +14165555555 in Teams. Existing Environment. Problem Statements Contoso identifies the following issues: • A user in the London office cannot locate the recorded files from a recurring Teams meeting. • Executives in the New York office report having to use Microsoft Authenticator to access their Microsoft OneDrive files from the Surface Hub. • A user in the Toronto office reports receiving incoming calls while attending Teams meetings instead of having calls sent automatically to voicemail. Requirements. Planned Changes - Contoso plans to implement the following changes: • Deploy a new Teams-certified endpoint to all the boardrooms and huddle spaces in all the offices. • Start a pilot project to deploy an Intelligent Speaker to the boardroom in the Rome office and evaluate transcription and voice attribution capabilities. • Deploy a Teams shared device to the lunchroom in the Toronto office. Calls placed to +14165555555 must ring in both the reception area and the lunchroom. Requirements. Technical Requirements Contoso identifies the following technical requirements: • The endpoint deployed to each boardroom must include a console on the table. The endpoint must automatically invite the existing Surface Hub when joining a Teams meeting. • The sales team must be able to temporarily sign in to the endpoints deployed to the huddle spaces to respond to Teams messages and attend video calls. • The endpoints deployed to the huddle spaces must allow only outbound emergency calls when a user is NOT signed in. • During Teams meetings, the sales team must have a watermark displayed on shared content. You need to address the issue reported by the Toronto office user. You create a new calling policy. What should you do next?

A. Set Voicemail for inbound calls to On.
B. Set Busy on busy during calls to Use unanswered settings.
C. Set Voicemail for inbound calls to Let users decide.
D. Set Busy on busy during calls to On.
Show Answer
Correct Answer: B
Explanation:
To have incoming calls automatically follow the user's unanswered handling (typically voicemail) while the user is already engaged in a Teams meeting, configure Busy on busy during calls to Use unanswered settings. Setting Busy on busy to On rejects the call instead of sending it through the unanswered routing, while the voicemail inbound options alone do not enforce this busy behavior.

Question 95

You have a Microsoft Teams Phone deployment. You need to deploy the Hotline feature to a group of Teams devices. What should you do?

A. Run the Set-CsUserCallingSettings cmdlet.
B. From the Microsoft Teams admin center, create a configuration profile for Teams displays.
C. Run the New-CsTeamsIPPhonePolicy cmdlet.
D. From the Microsoft Teams admin center, create a configuration profile for Teams Phone.
Show Answer
Correct Answer: D
Explanation:
Hotline is configured as part of Teams Phone device configuration profiles in the Microsoft Teams admin center. It is not enabled through Set-CsUserCallingSettings, Teams display profiles, or New-CsTeamsIPPhonePolicy.

Question 96

You have a Microsoft Teams deployment. You have a meeting room that contains a Teams Rooms for Android device assigned to an account named Room1. You deploy a Teams panel to the entrance of the meeting room and sign in the panel by using the Room1 account. You need to ensure that attendees are notified when participants of the next meeting are waiting to use the room. What should you configure from Device settings on the Teams panel?

A. Device pairing
B. Allow room reservation extensions
C. Max room occupancy notification
D. Allow early check-out
Show Answer
Correct Answer: A
Explanation:
Configure Device pairing on the Teams panel so it is paired with the Teams Rooms device. This enables coordinated room and panel features, including notifications to the in-room system when the next meeting attendees are waiting to use the room. The other options relate to reservation extensions, occupancy notifications, or early check-out rather than notifying current occupants about waiting participants.

Question 97

You have a Microsoft 365 E5 subscription and a Microsoft Teams deployment that contains the users shown in the following table. You plan to use a custom policy package to contain a set of meeting policies, calling policies, and live event policies. You need to ensure that Admin1 can create the custom policy package, and User1 and User2 can be assigned the package. Which users require a Teams Premium license?

A. Admin1 only
B. User2 only
C. User1 and User2 only
D. Admin1, User1, and User2
Show Answer
Correct Answer: C
Explanation:
Creating and assigning custom policy packages requires Teams Premium capabilities in the tenant, but the Teams Premium license is required for users who are assigned Teams Premium policy packages and features. An administrator can manage these policies without personally holding a Teams Premium license, provided the tenant has Teams Premium available. Therefore, the users who will be assigned the package (User1 and User2) require Teams Premium licenses. Sources: https://learn.microsoft.com/en-us/microsoftteams/meeting-policies-overview

Question 98

DRAG DROP - You have a Microsoft Teams Phone deployment. You purchase 25 new Android phones. You need to remotely bulk provision the phones to Teams. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Illustration for MS-721 question 98
Show Answer
Correct Answer: Upload MAC addresses Generate verification code Enter verification code on each device Perform first-time remote sign-in from Teams admin center
Explanation:
Remote provisioning requires registering devices by MAC, generating a verification code, entering it on the phones to pair them, then completing the first-time remote sign-in. Assigning a location to the MAC is optional, and Refresh Code is only used if needed.

Question 99

You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBC). A user named User1 is configured as shown in the following exhibit. User1 reports that when an external caller attempts to call the phone number of User1, the external caller receives an error message. User1 can make outbound calls, but no caller ID appears. Which two commands should you run to resolve the issues? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Grant-CsCallingLineIdentity -Identity [email protected] -PolicyName CallerID
B. Grant-CsOnlineVoiceRoutingPolicy -Identity [email protected] -PolicyName $null
C. Remove-CsPhoneNumberAssignment -Identity [email protected] -PhoneNumber +61370105555 -PhoneNumberType CallingPlan
D. Set-CsPhoneNumberAssignment -Identity [email protected] -PhoneNumber +61370105555 -PhoneNumberType DirectRouting
E. Set-CsPhoneNumberAssignment -Identity [email protected] -EnterpriseVoiceEnabled $true
Show Answer
Correct Answer: A, D
Explanation:
The number range is allocated to a Direct Routing SBC, so the user's assigned number must be configured as a Direct Routing number. Assigning it with Set-CsPhoneNumberAssignment using -PhoneNumberType DirectRouting resolves inbound routing. The missing outbound caller ID is addressed by granting the appropriate Caller ID policy. Removing and re-adding the number is unnecessary, clearing the voice routing policy is unrelated, and Enterprise Voice is enabled through the modern phone number assignment process rather than the legacy switch.

Question 100

You have a Teams Phone deployment that uses Direct Routing. You plan to enable media bypass on a certified Session Border Controller (SBC). What should the SBC support to enable media bypass?

A. a Survivable Branch Appliance (SBA)
B. SILK
C. ISDN
D. ICE Lite protocol
Show Answer
Correct Answer: D
Explanation:
Microsoft Teams Direct Routing media bypass requires the Teams client to use ICE and the certified Session Border Controller (SBC) to support ICE Lite so that media can flow directly between the client and the SBC.

Question 101

DRAG DROP - You have a Microsoft 365 E5 subscription that uses Microsoft Teams Phone. You plan to deploy a new toll-free number for Teams meetings. You need to ensure that Microsoft Outlook meeting invitations display the toll-free number at the top of the invitation and at the top of a list of five toll numbers. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Illustration for MS-721 question 101
Show Answer
Correct Answer: Enable Communications Credits. Request a toll-free service number. Assign the toll-free service number to a conference bridge. Create and assign an Audio Conferencing policy.
Explanation:
Toll-free dial-in numbers for Teams Audio Conferencing require Communications Credits. After obtaining the toll-free service number, assign it to the conference bridge, then use an Audio Conferencing policy so the toll-free number is displayed as the default dial-in number in meeting invitations.

Question 102

HOTSPOT - You have a Microsoft Teams deployment. You have the Teams Rooms on Windows devices shown in the following table. Room1 has the following snippet from the SkypeSettings.xml configuration file applied. Room2 and Room3 have the following snippet from the SkypeSettings.xml configuration file applied. For each of the following statements, select Yes if True. Otherwise select No. NOTE: Each correct selection is worth one point.

Illustration for MS-721 question 102 Illustration for MS-721 question 102 Illustration for MS-721 question 102 Illustration for MS-721 question 102
Show Answer
Correct Answer: No Yes No
Explanation:
Custom background images require ThemeName set to Custom, so Room1 ignores the custom background entries. Room2 has ThemeName=Custom and a Teams Rooms Pro license, so the second display can use Pic2.jpg. Room3 has ThemeName=Custom but only a Teams Rooms Basic license, which does not support custom background images.

$19

Get all 253 questions with detailed answers and explanations

  • Instant download HTML + PDF delivered the moment payment clears.
  • Secure Stripe checkout we never see or store your card details.
  • 7-day refund if files are defective see our refund policy.